Inglese
Italiano 
Spagnolo 
Francese 
ON AIR WARNING LIGHT PROFFESSIONAL AEV
ON AIR WARNING LIGHT AEV
The new warning lamp On Air, a new design from the thin profile (2 cm!), easy to install.
A must-have accessory for both Radio and Television Studios, with ruby red lighting of great visibility, very useful to warn of the opening of microphones on the air.
The ignition, without delays, is controlled by a simple contact, the mounting for the two versions is wall (single-sided) and flag (double-sided).
Possibility to have writings/logos customizable to your specifications for the single-sided version.
Women's clothing size
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
ON AIR LIGHT PROFESSIONAL AEV
General Overview
The ON AIR LIGHT is a device for attaching an instant-on lighting flag (Model AEV-0229010003) or wall-mounted
(AEV-0229010002) to indoor or outdoor broadcasting and recording studios, the device can,
however, be used for any situation that requires a visual signal. The design of the device makes it
extremely easy to install, and its sleek design differentiates it from other similar devices.
The light that displays the sign is ruby red, which is very effective and highly visible, even in
bright and luminous environments. Generally used to indicate to operators the zone of silence for the
opening of microphones in the studio or in the presence of a speaker in transmission.
Connections
The mains power supply must be applied using an appropriate external power supply, the power supply unit
provides the DC voltage suitable for the operation of the device and is connected to the
connector on the right side of the aluminum frame.
The contact (e.g. switch with NOC) is required to control the lamp ignition and can withstand
a current of 1.5 mA; this contact will be applied to the two wires of the cable that is
contact connected to the device.
